Showing posts sorted by relevance for query VZ. Sort by date Show all posts
Showing posts sorted by relevance for query VZ. Sort by date Show all posts

Saturday, December 09, 2006

Boomsticks: I'm probably diagnosable...

They keep following me home, and I can't make them stop.


I don't know what it is about me and these derelict old rifles. Anyway, the latest arrival is a vz 52, (vz is simply an abbreviation for "vzor"; Czech for "type" or "model") a Czech rifle designed immediately after the German occupation of Czechoslovakia ended. The Czechs had an arms industry with a long tradition of quality and innovation, and the vz 52 was no exception. Designed using experiences gathered during WWII, it was a rifle that spanned two eras: Its full-length wood stock, intricately machined steel receiver, and semi-automatic operation wouldn't have been out of place in the 1930s, while its intermediate cartridge and detachable box magazine looked towards the future.

The trigger mechanism is nearly identical to that of the American Garand, while the gas system utilizes a short-stroke annular piston derived from that of Germany's Walther self-loading rifles. The bolt is a tipping design, much like the contemporary Belgian and Russian rifles, but utilises lugs at the front of the bolt, rather than at the rear. The proprietary Czech cartridge, 7.62x45mm, is roughly the ballistic equivalent to the Soviet 7.62x39mm M43 round. The whole package makes for a handy little carbine, slightly smaller than the Russian SKS, and a fair bit handier in the bargain.

Interestingly, the rifle was released as part of a whole suite of new infantry weapons in the early '50s by the Czechs, who hoped to get foreign currency in exchange. The weapons included an innovative pistol that used a roller-locking short recoil action to tame the potent 7.62x25mm Tokarev round, a general-purpose machine gun that was simply a belt-fed update of the proven Bren gun (another famous Czech design), and an innovative submachine gun featuring a bolt that telescoped around the breech and a magazine well integral with the pistol grip: both novel features that made for a compact weapon, and both features that would be cheerfully plagiarized by Uziel Gal when he "designed" his famous Uzi.

With this cornucopia of small-arms technical excellence poured at their feet, it is somehow unsurprising that the Soviets ignored it, and instead forced their own designs on the nascent Warsaw Pact. Meanwhile, most of the Czech weapons faded into undeserved obscurity, with sales slumping since both superpowers were essentially giving guns away to third-world nations who promised to be on their team.

The CZ52 pistol is well-known to American shooters, having been imported in droves over the last five years or more. Its companion rifle is a little less recognizable, and most of of them coming in recently have been barely shootable junkers. Ammunition for the vz 52 is scarce; the only source I could find online was Buffalo Arms (who also has most other scarce or obsolete calibers you might be looking for, as well as prompt and courteous customer service.) As soon as the ammunition gets here, I'll write up a range report.

Wednesday, September 08, 2021

The Seven Seventeen Year Itch

Ever since it was initially customized, this Model 57 has been wearing the same uncheckered pau ferro Hogue Monogrip.


In fact, my very first interaction with Farmer Frank was him pointing out how silly it was to go through all the effort of converting a square-butt frame to a round-butt and then putting a round-to-square conversion grip on it.

It wasn't necessarily the grip of choice, it was what was in stock at our wholesaler when the revolver was completed back in 2001. It was always intended to be a placeholder until a more permanent grip could be selected; ideally a set of Eagle Secret Service stocks to match the PC13. When I got it from Marko back in 2005, getting some proper round-butt stocks was high on my list of things to do.

Seventeen years down the road, I finally got around to doing something about it...


Those are VZ Grips 320 stocks, so named because they have a matte texture similar to 320 grit sandpaper. 

They're still a placeholder. I fully intend to get those Secret Service stocks on there, someday. (I could buy the VZ's on Amazon with free Prime delivery, but Eagle Secret Service stocks have something like a 4-week wait, and I'm all about the instant gratification.) Then I'll move these VZ's over to my 3" 629, probably, since the factory round-butt combat stocks on that thing are worth nearly half what I paid for the whole gun back in 2001.  

.

Friday, November 24, 2017

Gratuitous Gun Pr0n #167...

The test gun is now wearing VZ "Frag" grips in black & gray*. The little diamonds on the plastic grips were sharp enough to be annoying, at least to the heel of my weak hand. These give even greater grip without any pain. It doesn't hurt that they'e good-looking, either.

*Which I bought at retail from VZ's web store because I didn't know that Amazon sold them for the same price (and they were Prime-eligible from there! See link above.)
.

Sunday, March 07, 2010

"Handgun Shotgun Rifle" meme...

Not too long back, Jay at Firing Pin Journal asked:
One Handgun, One Rifle, One Shotgun. You are able to choose just one of each for self defense with NO modifications.
My answer was:
Handgun: The pistol on my hip. (Springfield Professional)
Shotgun: I’m not really shotgun kind of people.
Rifle: The carbine behind the door. (16″ M4gery on an RRA lower.)
Of course, the idea of one of each makes me nervous, as two or three identical copies are better. Guns break; at least they do if you're shooting enough. When one does, it's nice to be able to fill the holster with its identical twin while the other is off getting fixed.

This is why I'll feel a lot better when I get that second M4gery built. Suppose I go take a three-day carbine course this summer like I hope to and my weapon goes Tango Uniform halfway through day one? How silly will I feel if I can't yank a second one out and drive on?

I'm also a little confused by the "no modifications" thing. For example, my CCW pistol is a Springfield and its backup is an old Colt that was modified to feel exactly the same as much as possible (checkering, flat mainspring housing, long trigger, beavertail, 3-dot sights, same VZ Gatorback grips...) My carbine was built from a stripped lower; is that modified?

Saturday, December 02, 2017

Chugging right along...

Thursday afternoon saw me at Indy Arms Co with two hundred rounds of TulAmmo and the See Zed.

The range was crowded, so I basically loaded and fired about as quickly as I thought I could get away with it. Big, long strings of fire, up to and including mag dumps, are a lot more controllable with the VZ Frag grips as opposed to the stock plastic. Recommend.

There were no malfunctions of any kind to report.

This makes 1030 rounds since the weapon was last cleaned or lubed with no malfunctions of any type. 970 rounds to go.
.


Tuesday, July 16, 2013

A chance at free stuff...

Apparently Brownells is running some sort of 12 Days of Christmas in July sweepstakes thing. You can enter daily between now and the 30th either through the Facebookenings or at their web page. Today's prize looks to be some VZ Operator II grips for your 1911 in tactical grayish color that is perfect for operators who operate covertly in covert operations.

Wednesday, July 22, 2020

Sizing Error


Monday's range trip, I decided to do a bit of "just for fun" shooting in addition to the monotonous pew-pew-pew of trying to build up the round count on a test gun. And few things are as "just for fun" as the little Vz.61 Skorpion in 7.65 Browning, aka .32ACP.

Had a couple of interesting malfunctions before it was noticed that somehow some 9mm Browning (aka .380) ball had found its way into my .32 Auto ammo can. The two rounds have identical case head dimensions, with the semi-rimmed .32 having a smaller diameter case, and so are easier to confuse than most.

I need to make some time to weed it all out.
.

Thursday, July 12, 2007

Boomsticks: Reloading resource, or "The Czech is in the mail".

Owners of Czech vz 52 rifles can get spiffy reloadable boxer-primed brass with annealed case necks from here.

Monday, July 19, 2010

Notes from the day yesterday:

  • Breakfast at Good Morning Mama's. I had, instead of my usual Stuffed Burrito Sonoma, the Swiss Bliss omelet: pancetta bacon, spinach, 'shrooms, Swiss cheese, and drizzled with parsley butter. Yum!
  • Gander Mountain had a good selection of ammo. Prices were as expected for Gander Mountain: Not completely outrageous, but not screaming deals, either. I did pick up a carton of Federal .22 and added another box of .45 to the stash I'm trying to build up for class in October.
  • I can't hack the CTC Lasergrips on the Gun Blog 9 in the kind of 90% humidity weather we've been having lately. The rubber is just too slippery when my hands get all sweaty. I haven't used the laser in months anyway, so I'll just dig some conventional checkered grips out of the parts bin until I can shake loose the dough to order some VZ Gatorbacks from Brownells.
  • Out-of-state guests at the Blogmeet! Earl, riding back West after big adventures out East, and Mr. & Mrs. Crucis. And Frank brought sweet corn! It was a largish 'meet; I didn't get a head count, but there had to be close to twenty people. Bobbi has the quasi-offical report.
  • Thanks to a law change in Indiana, we can now finally buy take-home beer from brewpubs on Sundays, although the beer at the grocery or liquor store will still cause eternal damnation if purchased on the Sabbath. I celebrated with a growler of IPA.

Saturday, March 07, 2020

Automotif CLX...

If I had this late W126 SEL (I choose to imagine it's a 560 and not some plebeian 300 turbodiesel or watch-winder 4.2L V-8; it had been de-badged), I would get a shoulder holster for my vz. 61 and spend my days LARPing as a Cold War assassin.

The W126, with only one facelift, was the top-of-the-line Benzo for over a decade, from the 1980 model year to the 1992 one. That pretty much coincided with the formative years of my car nerdery. And when they dropped the 338cid OHC V8 in it for the '87 model year, it pretty much became the apex predator of the sedan world.
.

Monday, May 12, 2014

Does this trigger pull make my butt look big?

I don't know where this method of trigger reach measuring came from, but I think I learned it from Kathy. You can use a dressmaker's tape or, if you don't have a cloth tape handy, you could mark a string and measure it against a ruler.

The safest way to measure is on the frame of the field-stripped pistol, although some firearms will require that they be cocked to get an accurate measurement. Clear the chamber and then, since the gun is only "unloaded" in a Schrödinger's Cat sort of way, ensure that the muzzle remains pointed at something that you would not mind putting a hole through when you put the tape into the trigger guard.

Basically, you're looping around the trigger and the backstrap to come up with a number that is more relevant to "trigger reach" than simply measuring the straight-line distance between the two points, since it takes the girth of the pistol into account as well. A single-stack pistol and double-stack pistol could have the same distance from trigger to backstrap as measured by calipers, yet the fatter gun would be harder for the small of hand to get a good firing grip on.

Some plastic cop guns I had handy:
  • Smith & Wesson M&P 9 (with CTC Lasergrip mounted): 7"
  • Walther PPX: 7"
  • FNH FNS9: 7¼"
  • Glock 19 (Gen 3): 7½"
Classics for comparison:
  • Springfield Armory PC9111 "Professional" (VZ Gator Backs): just a hair over 6¾"
  • Smith & Wesson K-22 Combat Masterpiece (Spegel stocks): ~7½"

Thursday, June 29, 2023

Throwback Thursday


I've had this thing twenty-two years now. It was my main carry piece for almost eight of them. It had the "idiot mark" when I got it, but all the rest of the wear is from me.

I got it long before I kept logbooks so I have no idea how many rounds have been through it. Conservatively, somewhere between fifteen and twenty kay. Everything is still stock except, obviously, recoil and firing pin springs and those VZ grips.

I still wouldn't hesitate to carry it. In fact, I did carry it on that one trip to Gunsite a couple years back.

.

Friday, February 03, 2017

MicroGlock

Shooting with the Glock 43 continued yesterday, along with some work with the Gen3 19 that used to be my carry gun.

The 43 has received a Tango Down Vickers slide release, and I also added a Pearce frame insert and a Pearce +1 extension. The latter replacing the pinkie-rest floorplate on the second magazine. If I'm going to have extra length on the bottom of the grip, I'm gonna get more BBs to go with it.

The 19, having gotten the Tyr trigger, got a ZEV V4 connector to go with it. Combined with the stock trigger return spring, this gave a trigger pull of 4#, and I wanted to see what that did for the actual shooting.

Both guns ran fine, as expected.

I like the trigger setup in the 19. The trigger reach is pretty much unchanged. Using a dressmaker's tape to measure the circumference around the trigger face and backstrap yields as close to 7" as makes no nevermind, whether I was measuring the Gen2 Robar 17 with the Overwatch Precision trigger, the Gen3 19 with the SSVI Tyr trigger, or the Gen4 34 with the stock trigger.

There may have been a sub-0.1" difference between the various guns, as this wasn't the most precise way to measure. For comparison, a 1911 with a long trigger and VZ Gatorback grips measures 6.75" via the same method.

The shooting with the 19 was done in three-to-five-round strings with splits in the high .6's and low .7's; speeds at which I could get a good sight picture on the existing bullet hole. I found the trigger pretty controllable for me at those speeds and it didn't seem to induce any egregious blunders.

The 43 continues to surprise me by being more pleasant to shoot than I thought it would be.

For the 43, this makes 100 rounds fired since the gun was cleaned or lubricated. 1,900 rounds to go.
.

Thursday, December 16, 2010

...the hobgoblin of my little mind.

I just bought myself my Christmas present from Brownells: A set of VZ "Gatorback" grip panels for my CCA custom 1911. The double-diamond checkered Ahrend's Cordia wood panels that are on there now are pretty, but less grippy than I'd like. More importantly, both the other guns have the Gatorbacks, and I like them all to feel the same in my hand. Consistency makes me happy.

The Gatorbacks are pretty much bombproof, and the thing I like best about them is that they don't get slippery when my hands get all sweaty on a hot summer day at the range.

Monday, April 20, 2009

Shooty goodness weekend recap:

Friday: At noon (well, shortly thereafter, because I'd be late to my own funeral) I met Joanna and Caleb at Popguns indoor range, where I have a membership, and we did some shooting. Joanna had brought a Taurus snubby, and I let her shoot the K-22 and the Kit Gun, as well as the Gun Blog 9. Caleb shared some instructor tips with her, after pointing out to me that the gun had, you know, a fricken' laser on it, which is maybe the most useful tool for correcting trigger and grip problems known to mankind. After shooting, Joanna and I went to La Piedad for lunch and had a great time and Caleb punked out and went to mow the lawn or something.


Saturday: I drove up to Lafayette and was taken to the local gun show by Shootin' Buddy. It was awesome, because there was an ammo dealer there who seemed to specialize in strange stuff. I picked up five rounds of Norma 6.5x54 Mannlicher-Schoenauer, because it absolutely kills me to have a gun in the house for which I have no loaded ammo (I do have brass and dies, though...) But the big thing was that he also had three boxes of brand new .38 Automatic, which means I'll be able to take my 1902 to the range some fine day soon. From a guy who had a table full of odd magazines, I managed to get another vz.52 mag as well as a MecGar 9mm 1911 magazine.

After the show we went out to Wildcat Valley and burned up a few hundred rounds of .22 on the steel critter range. I gave my 980S its shakedown cruise and decided that I thoroughly detest the goofy red plastic blob it has by way of a front sight. It's annoying to miss steel critters with a rifle that I could hit shooting a .22 revolver double-action with no problem. On the upside, I had seven 10rd mags and four 7-rounders and could therefore load up a hundred rounds at a whack. We adjourned to the steel plate racks to burn up some pistol ammo before calling it a day and driving back into Lafayette for dinner at Maize.


Sunday: Because there hadn't been enough shooting done for the weekend, Shootin' Buddy drove down Sunday morning from Lafayette and we went for breakfast before hitting the range at Eagle Creek, trusting the rain to keep the non-serious at home. I brought my 5" 625 along and got some quality trigger time in with it. I really need to step up with this thing, because most folks agree that it's a nearly ideal bowling pin blaster. Also, the usefulness of having numerous mags was reinforced by the fact that I could drag the same big ziploc baggie full of mags that hed worked in the 980 Saturday and use them in the Papoose on Sunday.


You know what's more fun than shooty goodness? Moar shooty goodness!

Thursday, July 01, 2010

Do want...

One of the things I've been meaning to do for some time is get the gripframe on my Ruger 22/45 inlet to use standard 1911 grip panels. Both my Colt and my Springer have identical VZ Gatorbacks and I'd like to have the same grips on the deuce-deuce, but I'd kinda been holding back because nobody I knew had had it done yet and I'm not exactly what you'd call an "early adopter".

And now someone has. And I know his guns get used, too. I'll be watching for reports on suckitude or (hopefully) the lack thereof.

Saturday, February 06, 2021

Custom Creations

I've done this one before, but it was fourteen years ago and the photo was potato-quality.

Basically, twenty years ago, before I'd even really gotten into collecting Smith & Wessons (the only Smif wheelyboi I owned at the time was a 625), my friend Marko and I were hanging out at Montague Gunsmithing in Knoxville, poring over the shop's copy of The Standard Catalog of Smith & Wesson. We were particularly entranced with the description of the Performance Center's rendition of the Model 13, which the Catalog described as "a very serious carry revolver".

"Oh, cool!" said Marko, "Maybe I'll find one at the gun show this weekend!"

"Yeah sure," I retorted, "and monkeys might fly out of my butt. They made four hundred of them, it says. What are the odds of one being at a gun show in Knoxville this weekend?"

Pretty good, as it turned out.


While waiting in line to get into a show a month or so later, Marko wound up swapping a .41 Magnum Ruger Blackhawk he had to the guy in front of us in line, straight up, for the dude's Model 57. In retrospect, a single-action Ruger for a pinned & recessed Smith is a pretty good trade.

Normally, a lightly-used 85-90% Model 57 would have been left to live out its life in factory condition, with a square butt and a six-inch barrel, but Marko had that PC13 on the brain and wanted to make a bigger brother for it, and thus began "Project PC57", with the skilled hands of Shannon Jennings at Montague Gunsmithing.

Step one was sourcing a new 4" .41 Magnum barrel from Smith & Wesson. This being mid-2001, it must have been one of the last ones they had in stock; only a few years later, New Old Stock parts for Smiths of this vintage just didn't exist any longer. Since the project gun had a pinned barrel, Shannon had to notch the threads on the new tube in the right place to accept the pin. Before being mounted on the gun, the barrel was sent to Mag-na-port for a quad porting job to match the one on the PC13.

Shannon ground the frame from a square-butt contour to a round-butt one, and then expertly re-cut the serrations on the backstrap so that it looked factory. The 57 originally had a target hammer and trigger. The hammer got bobbed and the wide, serrated target trigger got narrowed and had its face smoothed and rounded, and then a little strategic dabbing with cold blue restored a mottled finish to the ground areas that matched the case coloring of the untouched parts.

The gun was carefully given a fine matte blue finish to match that of the PC13. Then as a final touch, Shannon used a dovetail cutter on the front sight blade to cut a notch for a red epoxy insert in the ramp, and hand painted a white outline on the rear sight blade to match.


As it sat when I acquired it, the gun only needed two changes. First, Shannon had originally done a PPC-style trigger job on it back in '01. It was unbelievably smooth and light, but the trigger return was too soft and it was easy to outrun in fast double action work. The late Denny Reichard at Sand Burr Gun Ranch fixed it by doing a really nice street/carry trigger job, using factory springs.

Lastly, the gun has been wearing a round-to-square conversion Hogue Monogrip on it since it was built, mostly because that's all that was immediately available in the shop. I'm going to fix that as soon as I decide whether to put this slick-looking set of VZ 320s on it, or to go with Eagle Secret Service stocks to match the ones on the PC13.

.

Monday, November 27, 2017

It's time again...

...for my annual Cyber Monday rant, where I ask "How is this even a thing anymore?"

See, twenty years ago, when everybody was on dialup, nobody bought anything online on Black Friday, The Biggest Retail Shopping Day of the Year, because they were all out shopping in meatspace. Even if they'd been at home, they would have had to fight to use the lone dialup connection since the kids were out of school and playing Ultima Online and dad was home from work and patiently waiting to download some porn.

The reasoning behind "Cyber Monday" was already waning in relevance when this was the new hotness.
But when you went back to work on Monday, you could screw off at your desk for a couple hours and use that big ol' T1 fat pipe internet connection to get some quality shopping in at boo.com and Pets.com and all the other .coms that are no longer with us except for Amazon.com.

Nowadays you have a broadband internet connection in your pocket and could theoretically be using it to shop while you're standing in line out front of Mart-Mart on Thanksgiving afternoon waiting for those Black Friday door-busters. So why is "Cyber Monday" even still a thing?

That said, here are some of the ads clogging my inbox this morning:
  • Sig Sauer has 25% off...well, almost everything, it looks like.

  • VZ Grips has 20% off today.

  • KEH Camera Brokers has $50 off if you spend $300+, $100 off if you spend $600+, and $200 off if you spend $1000+. Discount code is "CYBER17E".

  • Maxpedition has a BOGO sale on all Legacy Series backpacks, bags, and accessories. (I have been using the Fliegerduffel suitcase Shootin' Buddy gave me for years now. Recommend.)


Tuesday, August 31, 2021

Get A Grip

Back in the Nineties, the first "upgrade" I tended to make to a handgun was to throw a set of Hogues on it. I liked the matte black look and the soft, squishy feel of the santoprene Hogues, like the ones on this Smith & Wesson 1066, over the harder, shinier rubber found on Pachmayrs. 


But that was because at the time I spent a lot more time holding handguns than shooting or carrying them. I quickly learned that when I put them on a CCW gun, the tacky texture of the soft rubber would bind against the cloth of many cover garments. It was also tacky enough to the touch that it could be difficult to shift the gun in your grip even if you wanted to.

In the early Aughties, as I read more detailed accounts of shooting technique, and studied more about revolvers specifically, I learned that noted authorities like Bill Jordan and Jerry Miculek preferred smooth stocks on their wheelguns, so I ditched the soft santoprene and got more into the uncheckered Hogue hardwood Monogrips, like the Pau Ferro ones on this Model 19 Combat Magnum.


The stated reason for Jordan and Miculek preferring these smooth grips is that they could adjust their grip as they were acquiring a sight picture, if it were necessary to compensate for a less-than-prefect initial grip on the draw. Then they could just clamp down and start shooting.

Thing is, dudes like Bill Jordan and Jerry Miculek could probably crack walnuts between thumb and forefinger. They could clamp down on a set of smooth revolver stocks and keep the gun from shifting via brute grip strength. Alas, this was not an option available to me*.

I needed a material that was itself hard and relatively low friction, but which could be textured such that when I clamped down on it it wouldn't shift in my grip. You know, like normal checkered hardwood grips. Huh.


The Spegels on this K-22 Combat Masterpiece are, bar none, the nicest revolver stocks I've used. Enough so that I wish my Model 19 were a square-butt so I could swap them over. Maybe I'll hunt down a 4" Model 65 or 681...


If one prefers something a little more rugged and ugly than wood, there are numerous textured offerings in G10 or Micarta these days that accomplish the same thing. My 1911s, for example, pretty much all use VZ Grips, except for the Wilson, which came with Wilson's own pretty decent G10 "Sunburst" textured grip panels.

*At least, not without a little cheating.

.